12.6 Spare parts
Technical questions and spare parts
If you have technical questions or when you order spare parts, state the serial number. The serial
number is stated on the type plate of the unit.
For further information, or to check the availability of spare parts, contact Struers Service. Contact
information is available on Struers.com.
Note
Replacement of safety critical components must only be performed by a Struers
engineer or a qualified technician (electromechanical, electronic, mechanical,
pneumatic, etc.).
Note
Safety critical components must only be replaced by components with at least the
same safety level.
12.7 Service and repair
We recommend that a regular service check be carried out yearly or after every 1500 hours of use.
When the machine is started up, the display shows information about total operation time and the
machines service information.
After 1500 hours of operation time, the display will show a message reminding the user that a service
check should be scheduled.
Note
Service must only be performed by a qualified technician (electromechanical,
electronic, mechanical, pneumatic, etc.).
Contact Struers Service.
Service check
We offer a range of comprehensive maintenance plans to suit the requirements of our customers.
This range of services is called ServiceGuard.
The maintenance plans include equipment inspection, replacement of wear parts,
adjustments/calibration for optimal operation, and a final functional test.
12.7.1 Service check - LaboForce-100
Information about total operation time and servicing of the machine is displayed on the screen at
start-up.
After 1,500 hours of operation time, a pop-up message will appear to alert the operator that the
recommended service interval has been exceeded.
• Contact Struers Service.
Service information
LaboForce-100 provides extensive information about the condition of the various components.
90 LaboPol-30
12 Maintenance and service
To Next Page