Indication Force
0 0 N
1
2.5 N
2
5 N
3
7.5 N
4
10 N
5
12.5 N
6
15 N
7
17.5 N
8
20 N
9.2.7 Forced rotation of specimens
To avoid directional abrasion of the specimens during preparation, LaboForce-Mi can carry out
forced rotation of the specimens.
Using forced rotation
• Move the angled stainless-steel pin
down and press it into the clips on the
left-hand side of LaboForce-Mi.
Stopping forced rotation
• Move the angled stainless-steel pin up
and press it into the clips on the left-
hand side of LaboForce-Mi.
A Steel pin
9 LaboForce-Mi
LaboPol-30 73
To Next Page