Struers LaboPol-30 - Spin Functionality; Splash Guard Usage

Note
Close the water tap before you start a polishing process.
For optimal results and to avoid splashing, position the water tap between the center and the left
edge of the polishing disc.
Apply water manually
• To start applying water, press the Water button and open the water tap.
• To stop applying water, press the Water button or close the water tap.
8.2.3 The spin function
Only use the spin function to rotate the preparation disc at high speed
• to remove water from the surface of the disc.
• to remove water from an MD-Disc or a SiC Foil/SiC Paper before you remove it,
• to dry an MD-Disc or an MD-Chem cloth
At 150 rpm
• To start the spin function, press the Disc rotation button.
• To stop the spin function, press the Disc rotation button again.
At 600 rpm
• To start the spin function, press and hold the Disc rotation button.
• To stop the spin function, release the Disc rotation button.
8.2.4 The splash guard
Manual preparation • The splash guard for manual preparation is supplied
with the machine. (For the 300 mm diameter disc)
Semi-automatic preparation • Use the splash guard for semi-automatic preparation.
Wet grinding (for plain-back SiC
Paper)
• Use the splash guard for the Wet Grinding Disc.
52 LaboPol-30
8 LaboForce-100