Struers LaboPol-30 - Table of Contents

Table of Contents
1 About this manual 8
2 Safety 8
2.1 Intended use 8
2.2 LaboPol-30safety precautions 9
2.2.1 Read carefully before use 9
2.3 Safety messages 10
2.4 Safety messages in this manual 11
3 Getting started 13
3.1 Device description 13
3.2 LaboPol-30 - Front view 14
3.2.1 Control panel/Specimen movers 15
3.3 LaboPol-30 - Rear view 16
3.4 Struers knowledge 16
3.5 Accessories and consumables 16
4 Transport and storage 17
4.1 Transport 17
4.2 Long-term storage or shipping 17
5 Installation 18
5.1 Unpack the machine 18
5.2 Check the packing list 18
5.3 Lift the machine 19
5.4 Location 20
5.5 Power supply 20
5.5.1 Single-phase supply 21
5.5.2 2-phase supply 21
5.5.3 Connection to the machine 21
5.6 Water supply and water outlet 21
5.6.1 Connecting to the water supply 21
5.6.2 Connecting to the waste water outlet 22
5.7 Recirculation unit 22
5.7.1 Connecting the recirculation cooling unit to the water inlet 22
5.7.2 Connecting the recirculation cooling unit to the water outlet 23
5.7.3 Connecting the communication cable 23
5.8 Installing the preparation disc 23
LaboPol-30 3