12 Maintenance and service
Proper maintenance is required to achieve the maximum up-time and operating lifetime of the
machine. Maintenance is important in ensuring continued safe operation of your machine.
The maintenance procedures described in this section must be carried out by skilled or trained
personnel.
Safety Related Parts of the Control System (SRP/CS)
For specific safety related parts, see the section "Safety Related Parts of the Control System
(SRP/CS)" in the section "Technical data" in this manual.
Technical questions and spare parts
If you have technical questions or when you order spare parts, state serial number and
voltage/frequency. The serial number and the voltage are stated on the type plate of the machine.
12.1 General cleaning
To ensure a longer lifetime for your machine, we strongly recommends regular cleaning.
Note
Do not use a dry cloth as the surfaces are not scratch resistant.
Note
Do not use acetone, benzol or similar solvents.
If the machine is not to be used for a longer period of time
• Clean the machine and all accessories thoroughly.
12.2 Daily
• Clean all accessible surfaces with a soft, damp cloth.
• Check the bowl liner and clean or dispose of it when it is filled with debris.
12.3 Weekly
• Clean all accessible surfaces with a soft damp cloth and common household detergents.
• For heavy duty cleaning, use a heavy duty cleaning agent such as Solopol Classic.
86 LaboPol-30
12 Maintenance and service
To Next Page