Need help?Do you have a question about the Struers Accutom-100 and is the answer not in the manual?
Defines the proper and improper applications of the machine.
Essential safety warnings and guidelines for operating the equipment.
Explains graphical symbols and text formatting used in the manual.
Covers unpacking, placement, components, safety lock, and power.
Details cooling system, wheel mounting, debris, exhaust, and noise management.
Instructions for mounting specimen holders and connecting vacuum chucks.
An overview of the front panel and its controls.
How to read the display and navigate the machine's menus.
Configuring language, units, and editing various machine parameters.
Steps for editing, copying, and managing cutting/grinding methods.
Covers advanced functions, configuration, and operation modes.
Routine and periodic tasks for maintaining the machine's performance.
Proper care, dressing, and testing procedures for cutting wheels.
Guide to accessories, consumables, troubleshooting, service, and diagrams.
Checklist for preparing the installation site and ensuring requirements are met.
Detailed technical specifications for the machine's performance and dimensions.
Official statement confirming product compliance with directives and standards.
General| Motor Power | 0.75 kW |
|---|---|
| Weight | 82 kg (181 lbs) |
| Cutting capacity | Up to Ø60 mm |
| Spindle speed | 300-3000 rpm |
| Speed Range | 300-3000 rpm |
To Next Page