Struers LaboPol-30 - Starting and Stopping Preparation

5. Select the lubricant bottle number.
6. If needed, select the dosing levels or water.
7. Set Speed for the disc rotation speed.
8. Set Time for the preparation time.
9. See Starting and stopping the preparation process ►64.
8.3.2 Starting and stopping the preparation process
Starting the preparation process
WARNING
Do not use the machine with defective safety devices.
CAUTION
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
CAUTION
Keep clear of rotating parts during operation.
Note
We recommend that an exhaust system is applied when alcohol-based suspension
or lubricants are used.
1. Select the desired preparation method, and if needed the desired step.
2. Press the Start button on the control panel to start the preparation.
The disc will start turning at the pre-set speed, and dosing will start.
The step being performed is highlighted in green on the screen.
64 LaboPol-30
8 LaboForce-100