CAUTION
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
A Disc speed control
Button Function
Disc rotation
• Starts rotation of the disc (Spin function).
Water
Manual override
• Press the button to apply water. Water is applied when no process is running.
• Press the button again to stop applying water.
Start
• Starts the preparation process.
Stop
• Stops the preparation process.
7.2.2 Water tap
Apply water automatically
Water is applied when a process is running.
• During grinding, open the nozzle on the water tap to apply water.
• During polishing, close the nozzle on the water tap.
Note
Close the water tap before you start a polishing process.
For optimal results and to avoid splashing, position the water tap between the center and the left
edge of the polishing disc.
7 LaboForce-50
LaboPol-30 35
To Next Page