9.1 Installation
9.1.1 Unpack the machine
Note
We recommend that you keep all original packaging and fittings for future use.
1. Cut the packing tape on the top of the box.
2. Remove the loose parts.
3. Remove the unit from the box.
9.1.2 Check the packing list
Optional accessories may be included in the packing box.
The packing box contains the following items:
Pcs. Description
1 LaboForce-Mi
1 Spacing disc
1 Instruction Manual set
9.1.3 Installation - LaboForce-Mi
Note
This device must be mounted securely on the machine.
Note
Do not use the speed control knob on the control panel to move the specimen
mover.
Procedure
Install the specimen mover in the connection hole of the machine.
1. Remove the plastic disc protecting the communication cable.
9 LaboForce-Mi
LaboPol-30 67
To Next Page