Struers LaboPol-30 - Maintenance Menu Operations

Disc diameter
LaboForce-100 automatically recalculates process parameters such as time and dosing levels
when a disc is changed from a 250 mm diameter disc to a 300 mm diameter disc, or vice versa.
There is no need to adjust the method when another disc size is used.
Procedure
1. Select Configuration > Options > Disc diameter.
2. Select the size of the disc you wish to use.
3. Confirm your selection.
Returning to the default value
Hint
Make a note of the customized setting before you reset the setting to the default
value.
1. To return a setting to the default value, mark the value you wish to reset.
2. Press F1 on the control panel.
8.2.11 Maintenance menu
• Cleaning of tubes
See alsoCleaning the tubes ►83.
• Cleaning of specimen mover head
See also LaboForce-100 - the specimen mover head ►87.
• Reset configuration
See also Resetting the configuration ►59.
• Service information
Resetting the configuration
Resetting the configuration will reset all configuration parameters to their default factory settings.
Hint
Make a note of all customized settings before you reset the configuration.
8 LaboForce-100
LaboPol-30 59