8.1 Installation
8.1.1 Unpack the machine
Note
We recommend that you keep all original packaging and fittings for future use.
1. Cut the packing tape on the top of the box.
2. Remove the loose parts.
3. Remove the unit from the box.
8.1.2 Check the packing list
Optional accessories may be included in the packing box.
The packing box contains the following items:
Pcs. Description
1 LaboForce-100
1 Connection piece. Diameter: 6 to 1/8"
1 Allen key with cross handle, 4 x 150
1 Spacing disc
1 Distance piece, to be used with flexible specimen holders
1 Instruction Manual set
8.1.3 Installation - LaboForce-100
Note
This device must be mounted securely on the machine.
Note
Do not use the Turn/push knob knob to move LaboForce-100.
8 LaboForce-100
LaboPol-30 41
To Next Page