Struers LaboPol-35 - Bearing Construction Assembled; Bottom, Assembled; Drawings; Electrical Panel, Assembled

LaboPol-35
Spare Parts and Diagrams
17
The following is a list of the spare parts that may need replacement
during the lifetime of the equipment.
To check the availability of other replacement parts, please contact
your local Struers Service Technician. It may help identify the part by
referral to its position number on the assembly drawings included in
this manual.
Spare part list for LaboPol-35
Drawing Pos. Spare Part Cat no:
15550040
Bearing construction assembled
Ball bearing 6006 2RS w.damper 15540116
Shim PS50x62x1 DIN988, 3 pcs 2ZP50010
Disc spring 51.5x35.5x0.6, 2 pcs 2GF51018
Ball bearing 6205-2RSR 2BK00055
External circlip A25 DIN471 2ZL10250
Key A 5x5x16 2ZF10516
Body disc ø8/ø30x2 BN732 2ZC70830
16110020
Bottom, assembled
Sealing strip Grey 2x5, 2 m 2IP10202
Poly-V belt 450 J6 (L=1143) 2JD31143
LenzeFrq.conv.8200smd370W16kHz 2PU81372
15860021
Electrical panel, assembled
Switch 1804.1102 Black 2SA60104
Solid State Relay 10A 4-30Vdc 2KL81310
Mains socket w. fuse + switch 2XN32107
Fuse holder, Mains socket 2XN32901
4.00A T Fuse glass 6.3x32 250V, 2 pcs 2FU14200
Module holder. 3 elem. MHR-3, 2 pcs 2SA41603
Contact block 1 NC 1/2. MTO 2SB10071
Contact block 1 NO 3/4. MTI 2SB10072
16110035
Motor with sledge
Motor 71C4 370W 240 60CSA ptc 2ME51553
14920065
Water tap, assembly
Water tap, assembly R5200050