5.3.1 Connecting the battery charger
When the battery pack is inserted in the machine, the equipment can be connected directly to the
electrical power supply through the battery charger.
CAUTION
Always connect the battery charger to the battery pack before you connect the
battery charger to the electrical power supply.
Connecting the equipment to the electrical power supply
You can connect the equipment to the electrical power supply:
1. Make sure that the battery pack is inserted in the
machine.
2. Unscrew the cover covering the socket. (A)
3. Insert the plug from the battery charger into the
socket. (B)
4. Connect the battery charger to the electrical
power supply.
5.3.2 Charging the battery
CAUTION
Always connect the battery charger to the battery pack before you connect the
battery charger to the electrical power supply.
1. Connect the battery charger to the battery pack.
2. Connect the battery charger to the electrical power supply.
The LED turns green when charging is complete.
Note
If you need to check the battery level, connect the battery to the charger or the
machine.
5 Installation
TransPol-5 19
To Next Page