1 About this manual
CAUTION
Struers equipment must only be used in connection with and as described in the
Instruction Manual supplied with the equipment.
Note
Read the Instruction Manual carefully before use.
Note
If you wish to view specific information in detail, see the online version of this
manual.
2 Safety
2.1 Intended use
TransPol-5 is a portable grinding and polishing device for on-site materialographic preparation.
TransPol-5 is typically used for testing surfaces of workpieces that are not suitable for transport or
which are part of assembled constructions.
TransPol-5 equipment is intended for use in materialographic applications where the prepared
surface can be processed for further materialographic examination.
The equipment is designed to be used only with Struers consumables specifically designed for
this purpose and this type of machine.
The machine must be operated only by skilled/trained personnel.
Do not use the machine for
the following
Preparation (grinding or polishing) of materials other than solid
materials suitable for materialographic studies.
The machine must not be used for any type of explosive and/or
flammable material, or materials which are not stable during
machining, heating or pressure.
Do not use the machine with non-compatible accessories,
battery or consumables.
Model TransPol-5
1 About this manual
TransPol-5 5
To Next Page
Loading...