Battery status indicator
LED indicator Charging level Status
Orange 20% - 0% Maximum charge current (2 A).
Yellow 60% - 21% The battery is charged 80 - 95 %.
The charger is in timer mode and the
current is less than maximum.
Charging will continue for a set amount
of time up to 4 hours.
Green 61% - 100% The battery is charged 95 - 100%.
Charging has stopped.
5.4 Noise
For information on the sound pressure level value, see this section: Noise and vibration levels ►27,
CAUTION
Prolonged exposure to loud noises may cause permanent damage to a person’s
hearing.
Use hearing protection if the exposure to noise exceeds the levels set by local
regulations.
5.5 Vibration
For information on the total vibration exposure to hand and arm, see this section: Technical data
►26.
CAUTION
Risk of hand to arm vibration during manual preparation.
Prolonged exposure to vibration may cause discomfort, joint damage or even
neurological damage.
How to handle vibration during operation
Manual preparation may cause vibrations in hand and arm. To lower the vibration, decrease the
pressure or use a vibration-reducing glove.
• Limit grinding operations to a maximum of 10 minutes. Wait for 5 minutes before continuing
grinding.
6 Operate the device
CAUTION
Do not use the machine with non-compatible accessories, battery or consumables.
20 TransPol-5
6 Operate the device
To Next Page