Stryker 0240-031-000 User Manual

8
Display Handles
Note: The handles are intended to aid in positioning the display, not for transporting the
display. The handles should not bear the full weight of the display.
Removing or Reinstalling the Display Handles
To Remove:
1. Using a Philips screwdriver, loosen the two **(insert size)** screws and gently pull the
handle away from the display.
To Reinstall:
1. Align the handle with the screw holes on the rear of the display.
2. Using a Philips screwdriver, install the two **(insert size)** screws to attach the handle.
3. To remove the handles, loosen the screws with a Philips screwdriver and gently pull the
handle away from the display.

Stryker 0240-031-000 Specifications

General

Brand	Stryker
Model	0240-031-000
Category	Monitor
Language	English