Stryker 941 - Technical Specifications

12
Model REF 940
Electrical: 100-120V~ 50-60Hz 1.5A
Speed: Nominal at 100V~ Nominal at 120V~
High 12,800 cpm* High 15,900 cpm
Low 7,700 cpm Low 10,700 cpm
DOUBLE INSULATED
Class II equipment
Type BF Applied Part
IPX0 Ordinary Equipment
Duty Cycle:
Time on–15 minutes
Time off–20 minutes
Weight: 2.8 lbs. (1.3 Kg)
Length: 10.0 in. (254 mm)
Height: 3.0 in (76 mm)
NOTE: Only the items listed in the Replacement Parts List are
user serviceable. In case of other operating difficulties, return to
Stryker for repair.
CSA International
• CAN/CSA-C22.2 No. 601.1 M-90
• IEC 60601-1
• UL 60601-1
Model REF 941
Electrical: 220-240V~ 50-60Hz 0.75A
Speed: Nominal at 230V~ 50Hz
High 15,900 cpm*
Low 10,700 cpm
DOUBLE INSULATED
Class II equipment
Type BF Applied Part
IPX0 Ordinary Equipment
Duty Cycle: Continuous Operation with intermittent
loading.
Time on–15 minutes
Time off–20 minutes
Weight: 2.8 lbs. (1.3 Kg)
Length: 10.0 in. (254 mm)
Height: 3.0 in (76 mm)
NOTE: Only the items listed in the Replacement Parts List are
user serviceable. In case of other operating difficulties, return to
Stryker for repair.
Meets applicable requirements of:
IEC 60601-1 Safety Requirements
* Cycles per minute.
Specifications
If the equipment experiences sporadic electrical interference:
• Turn off all electrical equipment not in use.
• Relocate electrical equipment; increase spacial distance.
• Plug equipment into different outlets.