Stryker CrossFlow Quick Start Guide

WASH FUNCTION
Wash function
How to access and adjust the wash function.
Step 1: Access settings menu Step 2: Adjust wash settings Step 3: Start pump to perform
wash
= Wash function active
= Wash function inactive
= Wash settings sub-menu
= Increase pressure/ow/duration settings
= Decrease pressure/ow/duration settings
= Exit settings menu
5
Wash function
The wash function allows for a customized, quick increase in pressure and ow to
clear debris, control bleeding and improve visualization in the joint. Can customize
to last for a duration up to 120 seconds.
Understanding wash
EXAMPLE: 50% Pressure increase of 50 mmHg
set pressure would become 75mmHg during
wash cycle.
Refer to the instructions for use for important safety and user advice. Do not operate the device without rst reading and understanding the Instructions for Use.
6
= Pump customization menu

Stryker CrossFlow Specifications

General

Brand	Stryker
Model	CrossFlow
Category	Water Pump
Language	English