Pump start up
How to start up the pump and navigate to the Run Screen
Refer to the instructions for use for important safety and user advice. Do not operate the device without rst reading and understanding the Instructions for Use.
Step 1: Turn on pump Step 2: Insert cassettes
= Power on the pump
The CrossFlow start up screen will appear and a progess bar
will indicate that the pump is starting up.
2
START UP
2
Doctor 1
Dynamic Medium
XF2
STOP
Doctor 1
Dynamic Medium
XF2
STOP
Wait for “insert cassette” screen to appear, then align the colored side of the cassette
facing out toward its matching colored button. Green checkmarks will indicate that
the cassette(s) have been properly inserted. Once the Inow Cassette is inserted, the
pump will advance to the User Prole Selection Screen.
= Inow cassette (blue) = Outow cassette (red)
To Next Page
Loading...
Need help?
General
