Stryker Isolibrium 2971 User Manual

EENN
1-6 2971-109-001 REV B www.stryker.com
Introduction
Specifications
Model 2971 Isolibrium
Length 84 in. 213,4 cm
Width 35 in. 88,9 cm
Thickness 8 - 10.5 in. 20.3 - 26.7 cm
Weight 90 lb 40.8 kg
Therapeutic weight 50 lb to 350 lb 22.7 kg to 158.7 kg
Safe working load Isolibrium
(Sum of the patient and accessory
weight)
460 lb 208.6 kg
Electrical requirements
ANSI/AAMI ES60601-1:2005/ (R)2012
and A1:2012, C1:2009/(R)2012 and
A2:2010/(R)2012
CAN/CSA-C22.2 No. 60601-1 (2008)
120VAC 50/60Hz, 2.5A
Power cord
3 foot, 16 AWG cord with hospital grade plug for use with the InTouch foot end
auxiliary power outlet
Low Air Loss flow rate
100 LPM
Leakage current 300 uA Maximum
Noise level 50 dBA maximum
Stryker reserves the right to change specifications without notice.
Environmental conditions
Operation Storage and transportation
Ambient temperature
86 °F
(30 °C)
50 °F
(10 °C)
140 °F
(60 °C)
-40 °F
(-40 °C)
Relative humidity (non-condensing)
80%
20%
95%
10%
Atmospheric pressure
1060 hPa
700 hPa
1060 hPa
500 hPa
See the InTouch manual for bed specifications.

Stryker Isolibrium 2971 Specifications

General

Brand	Stryker
Model	Isolibrium 2971
Category	Medical Equipment
Language	English