Stryker Isolibrium 2971 User Manual

EENN
www.stryker.com 2971-109-0 01 REV B 1-33
Service
Protecting against Electrostatic Discharge (ESD)
CAUTION
• Always use ESD protective equipment before opening antistatic bags and servicing electronic parts.
• Do not place unprotected circuit boards on the floor.
Note: Always ship back circuit boards to Stryker in the same antistatic bags that the new boards were originally shipped
in.
The electronic circuits in the product are completely protected from static electricity damage when factory assembled.
Always use adequate static protection when servicing the electronic systems of the product. All service personnel must
use static protection whenever they are touching wires.
Sample antistatic protection equipment includes:
• 1 antistatic wrist strap
• 1 grounding plug
• 1 test lead with a banana plug on one end and an alligator clip on the other end
Make sure that you follow the ESD manufacturer’s instructions for appropriate protection against static discharge.

Stryker Isolibrium 2971 Specifications

General

Brand	Stryker
Model	Isolibrium 2971
Category	Medical Equipment
Language	English