Stryker L9000 - Product Description; Technical Specifications

Product Description
The Stryker L9000 Light Source is a light-generating unit
designed to illuminate surgical sites during endoscopic
applications. The L9000 uses a LED module to generate light,
which it delivers to the surgical site via a fiberoptic light
cable.
The L9000 is compatible with all Stryker light cables, and,
with the proper light cable and adapters, it can connect to
most flexible or rigid endoscopes.
The L9000 is equipped with Electronic Scope Sensing
Technology (ESST), a special safety feature that helps
prevent accidental burns caused by a light cable that is not
connected to the scope. When operated with an ESST light
cable like a Safelight”, the L9000 senses when the scope
and the light cable are separated and places the light source
in Standby mode. In Standby mode, the L9000 will reduce
light output to a minimum, preventing the light cable from
generating excessive heat.
Technical Specifications
Electrical
Primary: 100 — 240 VAC, 50/60 Hz, 400 W
Fuses (2): 5.0A, 250V
Dimensions
Height: 4.75" (12.1 cm)
Width: 12.5" (31.8 cm)
Depth: 16.8" (42.7 cm)
Weight: 16.0 lbs (7.3 kg)
Fiberoptic Cable Range
2mm - 6.5 mm diameter
Light Engine
Type: Red, Green, Blue LEDs Module
Operating Conditions
5 - 40°C
30 - 95% Relative Humidity
Transportation and Storage
-20°C - 60°C
10% — 75% Relative Humidity
700 - 1060 hPa
Classifications and Approvals
Complies with medical safety standards:
« IEC 60601-1:2005
+ CAN/CSA C22.2 No.601.1-M90
« UL 60601-1: 2003
Complies
with medical EMC standard:
+ IEC 60601-1-2:2001
Class 1 Equipment
Type CF applied parts
Water Ingress Protection, JPXO — Ordinary
Equipment
Continuous Operation
Patent Protection
USS. #5,850,496; 6,110,107; and 6,689,050.
Other patents pending.
Please contact your local Stryker Endoscopy sales
representative for information on changes and new products.