Stryker MMP200 User Manual

Name: Stryker MMP200
Brand: Stryker
Rating: 4 (1 reviews)

149 pages

To Next Page

Booms and Lights

July 2011 1004-400-061 REV YB www.stryker.com

Installation and Service Manual

ALL OR'S SHOULD BE CONSIDERED AS

FULLY INTEGRATED WITH VIDEO, VOICE

ACTIVATION AND INSTRUMENT CONTROL

Default Chapter5
- Table of Contents5
1 Warnings and Cautions10
- Safeguards and Precautions10
- Warnings10
2 Product Symbol Definition11
3 Tool List13
- Required Tools13
- Optional Tools13
4 Unpacking14
- Halogen Light14
- LED Light15
- Flat Panel Arms17
- Booms17
5 Preparing the Mounting (Interface) Plate18
6 Preparing the Suspensions19
- Installing the Cable Kit for Lights19
- Surgical Lights20
- Flat Panel22
- Booms22
- Routing Cables24
7 Installing the Suspension and Boom Arms25
- Alternate Light Installation Instructions (Continued)26
8 Installing Light Heads27
- LED and Halogen27
  - Standard Light27
  - Low Ceiling Light28
9 Powering the System31
- Halogen Lights31
  - Electrical and Data Connections31
- LED Lights32
  - Power Supply Box Wall Mount (Optional)32
- Power Supply Box Connections33
- Visum LED New Installation Setup36
10 Monitor Assembly40
- Light Flat Panel or Single Panel Installation40
- Adjusting the Yoke41
  - Adjusting the Width41
  - Adjusting the Height45
- Attaching the Monitor46
- Balancing the Monitor48
- Adjusting the Brakes50
11 Boom Shelf Attachment and Adjusting Brakes/Stops51
- Boom Shelf and Accessories Attachment51
- Lights and Flat Panel Arms60
- Adjusting the Cardanic Suspension66
- Boom Arms67
  - Osc40067
  - Osc60070
12 Installing Covers72
- Lights and Flat Panel Suspension72
- Booms72
- Tandem73
- Cable Covers75
- Installing a Flexstrip Kit (Dual Flat Panel Arm Only)78
13 Accessories79
- Lights79
14 Legacy84
- Suspension Installation84
- Installing Spring Arms (if Necessary for Lights Only Suspension)84
- Standard Width Yoke87
- Halogen Light Flat Panel Stop Replacement87
- Variant89
- Installing GCX Accessory Track on OSC400 Service Head89
15 Cleaning and Completion93
16 Servicing the Visum 600/45094
- Electronic Control System94
- Power Supply Box96
  - Halogen Power Supply Box Troubleshooting Guide96
- Wall Control99
- Plug Layout of the Electronic Control System101
- Plug Allocation101
- Can Bus Troubleshooting110
  - Light Block Diagram110
17 Servicing Booms114
- System Operation114
- Troubleshooting114
  - Air Leaks115
- Miscellaneous Hardware Parts List117
- Replacing the Trim Strip119
- Replacing Med Gas120
  - Replacing a Nitrogen Regulator120
  - Replacing Med Gas Plate120
- Replacing the Brake Bladder121
- Reassembling the Service Head127
- Replacing the Motor133
- Electro-Pneumatic (EP) Module135
  - Removing the Electro-Pneumatic (EP) Module135
  - Installing an Electro-Pneumatic (EP) Module135
- Generation 1 Service Head136
  - Replacing a Shelf with Brake136
  - Replacing the Brake Button138
18 Servicing the LED140
19 Replacement Part Numbers141
20 Contact Information147

Questions and Answers:

Need help?

Do you have a question about the Stryker MMP200 and is the answer not in the manual?

Stryker MMP200 Specifications

General

Category	Medical Equipment
Manufacturer	Stryker
Product	MMP200
Input Voltage	100-240 VAC
Input Frequency	50/60 Hz
Operating Temperature	10°C to 40°C
Storage Temperature	-20°C to 60°C
Compatibility	Stryker Endoscopy Systems
Safety Standards	IEC 60601-1

Related product manuals

Stryker S3 MedSurg 3002

Stryker T/Pump Series

54 pages

Stryker ProCuity Series

56 pages

InterPulse 0210 000 Series

118 pages

Stryker MMP200 User Manual

Table of Contents

Questions and Answers:

Stryker MMP200 Specifications

Related product manuals