8. If you want the SB6057 to pair with another Bluetooth device, press and hold the
PLAY/PAUSE BUTTON
(#15) until the
BLUETOOTH INDICATOR (#6) flashes. A
disconnected tone (Chime) will be heard to confirm the unit is disconnected from your
device. The unit is now in Pairing/Discoverable mode.
9
. Repeat steps 4 & 5.
Now you can play music from your Bluetooth device wirelessly to the SB6057.
1. Select a song and press the
Play/Pause Button
on your Bluetooth device or
PLAY/PAUSE BUTTON
(#15) on the SB6057
to play or pause the Bluetooth device
playback.
2. Tap the SKIP BUTTON (#14) to go to the next track. or SKIP
3. To go back to the beginning of the current track, tap the SKIP
BUTTON (#13) once.
To
go back to the beginning of the previous track, tap the
BUTTON (#13) again
within 2 seconds
.
4. Adjust the VOLUME CONTROL (#1) to obtain the desired volume level.
Notes:
1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth enabled
devices for Bluetooth operation since it may vary from model to model.
2. If your Bluetooth enabled device does not support A2DP profile, it will not play the
music through the speaker, even if paired (linked).
3. Remember to turn off the SB6057 when you have finished listening.
4. Don't forget to switch off the power of your external audio device as well.
AUX IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through the
speaker of the SB6057 by connecting the AUX IN JACK (#20) to your external player’s audio
out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK (#20) and the other
end of the cable to the headphone jack of your digital audio player.
2
. Tap the STANDBY BUTTON (#11) to turn on the unit. The STANDBY INDICATOR will
turn off.
3. If you repeatedly tap the FUNCTION
BUTTON (#12), you will step through the different
modes available:
Phono -> USB -> FM Radio -> AM Radio -> AUX -> Bluetooth
4. Tap the FUNCTION BUTTON (#12) repeatedly to select AUX mode.
5. The AUX INDICATOR (#7) will light.
6. Turn on and start playing the external device already plugged into the AUX IN JACK (#20).
7. Slowly adjust both the volume controls of the SB6057 and the external device until you
reach a comfortable listening level.
Notes:
• If you connected the Line-out Jack on your external device then you only need to adjust
the volume control of this system. If you connected the Headphone Jack of your external
device then you may need to adjust both the volume control of your external device and
the volume control of this system to find the most desirable volume setting.
• Tap the STANDBY BUTTON (#11) to turn off the unit when you finish listening. Don't
forget to switch off the power of your external device as well.
To Next Page
Loading...
Need help?
General
