D21m System
6-22 D21m Modules Date printed: 20.12.07
LEDs: SDI LOCK Indicates a valid SDI signal at the input.
HD Indicates a valid HD SDI signal at the input.
DIP Switches: S1
Switch Setting
1
OFF: 16-channel mode (factory default)
ON: 8-channel mode
2
OFF: Group 1/2 used in 8-channel mode (factory default)
ON: Group 3/4 used in 8-channel mode
3
OFF: SFC disabled (factory default)
ON: SFC enabled
4
reserved (must always be OFF; factory default)
S1
Switch Setting
A...F
reserved (default: OFF)
S1 A...F:
ALWAYS OFF
To Next Page
