31. Lead Guitar
32. Harmonic Guitar
33. Acoustic Bass
34. Finger Bass
35. Pick Bass
36. Fretless Bass
37. Slap Bass 1
38. Slap Bass 2
39. Synth Bass 1
40. Synth Bass 2
41. Violin
42. Viola
73. Piccolo
74. Flute
75. Recorder
76. Pan Flute
77. Bottle Blow
78. Shakuhachi
79. Whistle
80. Ocarina
81. Square
82. Sawtooth
83. Calliope
84. Chiffer
85. Charang
116. Wood Block
117. Taiko
, 118. Melody Tom
119. Synth Drum
120. Reversed Cymbal
121. Guitar Noise ,
122. Key Click
123. Seashore
124. Birds .
125. Telephone
126. Helicopter
127. Applause
128. Gunshot
SECTION 7.
TROUBLE SHOOTING
GUIDE
Appendix
PROBLEM Keyboard does not power up?
POSSIBLE
SOLUTIONS
•
Make
sure
the
power supply
is
connected
to
the
wall
outlet
• Make sure the power supply is properly connected to the keyboard
PROBLEM Keyboard does not seem to be sending MIDI notes to my modules
POSSIBLE SOLUTIONS Make sure you are not in the EDIT MODE.
Make sure the ZONE switch of the ZONE you are trying to play is on.
Make sure the MIDI channel you are playing on is enabled on your sound source.
Make sure your sound modules audio outputs are connected properly to your mixer or amp.
Make sure your mixer amp or sound system is on and the volume settings are up.
PROBLEM I have made changes in EDIT MODE but the changes do not seem to be present when I
return to PLAY MODE?
POSSIBLE
SOLUTION
•
This can happen very
easily.
When
you
enter EDIT
MODE
make sure you are
editing
the
ZONE
that
you were
playing
before
hitting
EDIT. When
entering
edit
mode
you
will
be on
the
ZONE
you
last
edited
not
necessarily
the
ZONE
you
have on
in
PLAY
MODE.
PROBLEM
I
know
I
am sending
MIDI
to
my
module
because
I
see
the
MIDI
indicator
light
up when
I play but I hear nothing?
POSSIBLE SOLUTIONS
•
Make
sure
the
VOLUME
PEDAL
is
depressed forward
to
send
full
volume!
• Make sure your sound modules audio outputs are connected properly to your mixer or amp.
• Make sure your mixer amp or sound system is on and the volume settings are up.
PROBLEM The SUSTAIN PEDAL does not seem to work?
POSSIBLE SOLUTIONS • Make sure it is plugged in properly to the SUSTAIN PEDAL INPUT
•
Make sure
the
SUSTAIN
PEDAL
is
enabled
for
the
ZONE
you
are
playing
PROBLEM The SUSTAIN PEDAL seems to work in reverse?
POSSIBLE SOLUTION • Power the keyboard down. With the SUSTAIN PEDAL plugged in to the SUSTAIN PEDAL INPUT
power
the
keyboard
up.
This
will
cause
the
SL-161/SL-61
to
sense
the
proper
polarity
set-
ting for the type of pedal you are using and adjust properly.
PROBLEM The WHEELS or AFTERTOUCH do not seem to work?
POSSIBLE SOLUTIONS
•
Make
sure
they
are enabled on
the
ZONE
you
are
playing
• Make sure they are enabled in the Patch in your module you are sending to.
PROBLEM I am playing a ZONE that I know is on but nothing is happening?
POSSIBLE
SOLUTIONS
•
Make
sure
you
are
playing
within
the
SPLIT range
of
notes set up
for
that
ZONE
• Make sure that the MIDI channel is set correctly.
•
Make
sure
the
VOLUME
PEDAL
is
depressed
and
all
other
volume
setting
are
up.
To Previous Page
Loading...
