UTILITY FUNCTIONS
The Utility functions perform special operations that are only needed occasionally. To use a Utility function, enter Edit Mode
and press FUNCTION switch 1 until the desired screen appears.
MIDI ACTIVITY
This screen is used to indicate the presence of MIDI messages on the MIDI input and output ports of the SL-2001. As a mes-
sage enters or leaves a port, the letter A though D will flash briefly to indicate the activity. In the example above, a message
has entered MIDI IN D and two other messages have been sent on MIDI OUT A and B. The MIDI Activity screen is very use-
ful for checking a preset for correct operation. When the keyboard or other control source is played, check to see that data
is also present on one or more output ports.
MEMORY USED
To Next Page
Loading...
