Studiomaster Professional DJA2500 - Page 16

 16
18.0 Transformer Removal
18.1 Perform procedure 1.
18.2 Remove all transformer connections.
18.3 Remove transformer mounting hex Bolt & plain washer from chassis bottom.
18.4 Remove transformer by lifting it upward.
19.0 Transformer Replacement
19.1 Place the transformer in the chassis & align mounting hole.
19.2 Fit bottom bolt & washer as per 18.3
19.3 Reconnect all wires as per 18.2
Note: After replacement of all above mentioned assy please refit the top cover as mentioned in
2.0