DATA: 07/11/2012
MATRICOLA: 0000408788
MODELLO: WPAR044207ZFT0 7035
ALIMENTAZIONE: 400 /3/50
Ord.Prod. 2120002673
WPAR044207ZFT0 7035
0000408788
2120002673
MODELLO/MODEL: WPAR044207ZFT0 7035 S.N.: 0000408788
ALIMENTAZIONE/POWER SUPPLY: 400 /3/50
LOTTO/LOT: 2120002673 DATA/DATE: 07/11/2012
NOTE/NOTES:
ITEM
maximum storage
temperature
45 °C
TSS:
15 © STULZ S.p.A. – all rights reserved EN/06.2016/i01
WPA EXPLORER ORIGINAL INSTRUCTIONS
3. Transport/ Storage
3.1 Delivery of units
To assure a persistent quality and reliability, all chillers are tested and inspected before leaving
the factory. The chillers are completely assembled when shipped and contain refrigerant under
pressure. It is also possible to ship the chillers without refrigerant gas. In this case the refrigerant
is substituted be nitrogen.
The chiller units must always be transported upright.
INFORMATION
The refrigerant circuit is filled with R410A refrigerant ready to use
The chiller is labelled as
follows:
• STULZ Logo
• STULZ order number
• Type of unit
• Packing piece – content
• Warning symbols
INFORMATION
• Due to the pre-filled refrigerant, the unit is marked as transport of dangerous goods
• The refrigerant is non-toxic and non-flammable
• For special shipping indication, please contact the corresponding sales department
• Special transport regulations must be checked country specifically
INFORMATION
When delivery is accepted, the unit is to be checked against consignment papers
for completeness and checked for external damage which is to be recorded on the
conseignment papers in the presence of the freight forwarder.
• You receive the consignment papers with the delivery of the chiller
• The shipment is made ex works, in case of shipment damages, please assert your claim
directly towards the carrier.
To Next Page
Loading...
