Need help?Do you have a question about the Stulz CyberCool 2 and is the answer not in the manual?
Explains warning symbols and their meanings for hazard communication.
General safety instructions for installation, operation, and maintenance.
Guidelines for safe handling of refrigerants, including PPE and precautions.
Operator responsibilities regarding refrigerating plants according to regulations.
Information on how chiller units are delivered and labeling.
Measures for protecting the unit during intermediate storage.
Safety instructions and methods for transporting chiller units using lifting devices.
Explains the unit variant based on the type code found on the nameplate.
Specifies the chiller's use for chilled water production and control.
Describes the construction sizes and internal components of the chiller.
Defines operational limits for storage, network, voltage, and chilled water.
Detailed technical specifications including performance and unit data.
Provides diagrams showing the physical dimensions of different construction sizes.
Guidelines for selecting and preparing the installation site for the chiller.
Details weight distribution of units on supporting structures by construction size.
Details on connecting and maintaining the external chilled water circuit.
Instructions for connecting the power supply, safety devices, and grounding.
Procedure for filling the water circuit and adding anti-freezing agents.
Steps to check and set up electrical components before powering on.
How to check and adjust pressure switch settings.
Procedure for pre-heating compressor oil before initial start-up.
Steps for commissioning the chilled water circuit, including pump and controller checks.
Steps for commissioning refrigerant circuits, including checks and adjustments.
General safety instructions specifically for maintenance work.
Table outlining recommended maintenance intervals for components.
Procedures for checking refrigerant circuit tightness, quantity, and purity.
Cleaning instructions for condenser and free cooling coils.
Checks related to water circuit tightness, evaporator, and pump.
Checks for electrical box, unit interior, and pipe insulation.
Lists alarms, their causes, and elimination steps.
Instructions for installing anti-vibration mounts.
Description and installation of the AxiTop fan extension option.
Details on feeding power supply cables from the side.
Explanation of the anti-corrosion coating option for coils.
To Next Page
General
