ULTRASONIC
66
Copyright STULZ GmbH 02/1997
PRECAUTIONS FOR OPERATION OF HUMIDIFIERS TYPE ENS
9) Observe local requirements and regulations for water supply con-
nection.
10) Provide sufficient clearance between the humidifier and the compo-
nent parts, which are connected in series, as e.g. the fan, in order to
ensure the dissolution of the aerosols and to avoid the generation of
condensates.
11) It is recommended to use maximum sensors in the intke air for con-
tinuous and multistage control.
12) For ON/OFF control with one humidifier, a maximum hygrostat can
also be installed in the intake air.
13) Take care to ensure that the water valve is kept open during the
humidification process.
14) Should malfunctions occurr try to eliminate them with the help of the
trouble shooting table.
To Next Page
Loading...
