Installation STULZ UltraWater 3-stage reverse osmosis system SUW
© STULZ GmbH, Hamburg
-
30
-
7.5. Electrical connection
Both STULZ UltraWater models are delivered fully wired.
Only connect the power supply when installation is complete.
1
Insert the plug of the STULZ UltraWater power
supply unit into a live socket.
Proceed as follows for the electrical connection:
Check the power cable, plugs and transformer housing for areas of damage.
Only connect equipment in perfect condition to the power supply. Faulty parts
must be replaced by specialist personnel.
Note:
Make sure that the electrical data on the rating plate matches the actual power supply at
the site.
To Next Page
Loading...