Stulz UltraWater 400 basic - Wall-Mounted Installation

STULZ UltraWater 3-stage reverse osmosis system SUW Installation
© STULZ GmbH, Hamburg
-
31
-
7.6. Wall-mounted installation
Proceed as follows to install the SUW 120 or SUW 400:
1
Check the function and tightness of the STULZ
UltraWater.
For this, see the "Start-up" section.
After a successful test, switch off the power sup-
ply to the system.
2
First screw the suspension bolts 2/3 into the wall,
and loosely suspend the SUW from them.
3
Position the SUW horizontally using a spirit level.
Next, fully tighten the suspension bolts.
Avoid any squashing or kinking of cables and hoses!
Note:
Select minimum distances from obstacles and minimum lengths of hoses and cables so
as to ensure that hoses and cables cannot be kinked or squashed.