STULZ UltraWater 3-stage reverse osmosis system SUW Safety instructions
© STULZ GmbH, Hamburg
-
9
-
2.8. Safety instructions for maintenance, inspection and installation work
The plant operator must ensure that all maintenance, inspection and installation work is carried out by
authorized and qualied specialist personnel who have been briefed by thoroughly studying the installation
and user guide.
The system must be stationary and switched off before any work is carried out. It is essential that the
procedure for shutting down the system, described in the installation and user guide, is complied with. All
safety and protective equipment must be reinstalled or re-enabled immediately upon completion of the
work.
Please note the points in the "Start-up" section before starting up the system.
2.9. Unauthorized modication and spare parts production
The system may only be converted or modied following consultation with the manufacturer. Genuine
spare parts and accessories authorized by the manufacturer are a guarantee of safety. Use of different
parts may void any liability for claims arising from possible consequences.
2.10. Preventive measures against water damage
All water-based technical systems can cause water damage if they suffer a fault. Before installation, exam-
ine to what extent other plants or buildings must be protected against water damage. A central oor drain
or leakage warning system can prevent more serious damage.
2.11. Spare parts
• We recommend the use of genuine spare parts. Genuine spare parts and spare parts/accessories ap-
proved by STULZ GmbH are a guarantee of safety.
• The spare parts list can be found in the following section: Spare parts. To order spare parts, call the
hotline or your specialist retailer.
To Next Page
Loading...