subzero.com
|
3
Product Information
Important product information including the model and
serial number of the unit are listed on the product rating
plate. For column models, the rating plate is located inside
the middle drawer near the drawer guide opposite the hinge.
For tall and drawer models, the rating plate is located inside
the cabinet, to the left of the upper drawer. Refer to the
illustrations below.
If service is necessary, contact Sub-Zero factory certied
service and have the model and serial number of the unit.
For the name of the nearest Sub-Zero factory certied
service or for questions regarding the installation, visit the
contact & support section of our website, subzero.com or
call Sub-Zero customer care at 800-222-7820.
INTEGRATED REFRIGERATION
Tools and Materials
• Screwdrivers—standard, Phillips and Torx.
• Power drill.
• Drill bits (masonry bits required for concrete installation).
• Standard socket and wrench set.
• 2' and 4' levels.
• Tubing cutter.
• 3'
(.9 m) of
1
/4" OD copper, braided stainless steel or
PEX tubing.
• Saddle valve.
• Material to protect home, ooring and cabinetry during
installation.
Column models.
Tall and drawer models.
RATING
PLATE
RATING
PLATE
To Next Page
Loading...
