Framed Panels 17
Partial Framed Option. If you choose not to use
custom panels above and below the glasswell for
dispenser Model BI-42SD or BI-48SD, a stainless steel
insert panel is available as a sales accessory. This
accessory kit includes partial framed molding and classic
stainless steel panel to provide a spill-resistant finish
above and below the glasswell on the refrigerator door
only. The partial framed accessory kit (7004855) is
available through your Sub-Zero dealer. Refer to panel
dimensions for the partial framed option below.
IMPORTANT NOTE: When using raised panels with the
partial framed kit, a
1
/2" (13) trim reveal down to
1
/4"(6)
thickness is necessary at the bezel for the panels to fit
properly.
Optional Partial Framed Panels
MODEL BI-42SD W H
Refrigerator Panel 15
1
/16" (383) 69
9
/16" (1767)
Freezer Panel 15
1
/16" (383) 69
9
/16" (1767)
MODEL BI-48SD W H
Refrigerator Panel 16
3
/4" (425) 69
9
/16" (1767)
Freezer Panel 16
3
/4" (425) 69
9
/16" (1767)
WW
H
BI-42SD / BI-48SD
Partial Framed Option
Partial Framed Kit
subzerotrade.com
Framed
To Next Page
Loading...
