Sub-Zero BI-36UFD - Page 17

Built-In Refrigeration 17
subzero.com/specs
Framed Application
PARTIAL FRAMED OPTION
If you choose not to use custom panels above and below
the glasswell for dispenser model BI-42SD or BI-48SD,
a stainless steel insert panel is available as a sales acces-
sory. This accessory kit includes partial framed molding
and stainless steel panel to provide a spill-resistant finish
above and below the glasswell on the refrigerator door
only. The partial framed accessory kit is available through
your authorized Sub-Zero dealer. Refer to panel dimen-
sions for the partial framed option below.
Optional Partial Framed Panels
BI-42SD W H
Refrigerator Panel 15
1
/16" (383) 69
9
/16" (1767)
Freezer Panel 16
7
/16" (418) 69
9
/16" (1767)
BI-48SD W H
Refrigerator Panel 18
3
/4" (476) 69
9
/16" (1767)
Freezer Panel 18
3
/4" (476) 69
9
/16" (1767)
WW
H
BI-42SD / BI-48SD
Partial framed option.
Partial framed kit.