FORESTER U.S.A. (E)
3
Instruments and controls
3-11
– CONTINUED –
Hazard warning flasher
HS0053
The hazard warning flasher is used to warn other drivers when you have
to park your vehicle under emergency conditions. The hazard warning
flasher works with the ignition switch in any position.
When you have to park your vehicle under emergency conditions, pull off
the roads safely and park away from the traffic if it is possible.
To turn on the hazard warning flasher, push the hazard warning button
on the instrument panel. To turn off the flasher, push the button again.
NOTE
When the hazard warning flasher is on, the turn signals do not work.
Light control switch
WARNING
To prevent battery discharge resulting from accidentally leaving
your lights on when your vehicle is parked, the light switch oper-
ates only when the ignition switch is in the “ON” position. In any
other position, the vehicle’s lights will be out. If you park your ve-
hicle on a roadside at night, use the hazard warning flasher to
alert the other drivers.
To Next Page
Loading...
