Subaru 2000 Forester - Operating Tips for Heater and Air Conditioner

FORESTER U.S.A. (E)
4
Climate control
4-9
– CONTINUED –
HS0073HS0072
ON position
To direct warm air to the windshield and front door windows:
1. Set the air inlet selection lever to the “
” position.
2. Set the air outlet control dial to the “ ” position.
3. Push the air conditioner button on.
4. Set the temperature control dial to the red area.
5. Set the fan speed control lever at the highest speed.
Operating tips for heater and air conditioner
B Cleaning ventilator grille
HS0083
Ventilator inlet grille
Always keep the front ventilator inlet grille free of snow, leaves, or oth-
er obstructions to ensure efficient heating and defrosting. Since the
condenser is located in front of the radiator, this area should be kept