FORESTER U.S.A. (E)
8
In case of emergency
8-7
– CONTINUED –
4. Put wheel blocks at the front and rear of the tire diagonally opposite
the flat tire.
HS0148
Jacking position
Wheel blocks
5. Take out the spare tire, jack, and wheel nut wrench. See the “Tire
changing tools” in this chapter.
6. Loosen the wheel nuts using the wheel nut wrench but do not remove
the nuts.
HS0149
7. Place the jack under the side sill at the front or rear jack-up point clos-
est to the flat tire.
Turn the jackscrew by hand until the jack head engages firmly into the
jack-up point.
To Next Page
Loading...
