FORESTER U.S.A. (E)
10
Maintenance and service
10-43
– CONTINUED –
CAUTION
Never replace a fuse with one having a higher rating or with mate-
rial other than a fuse because serious damage or a fire could re-
sult.
B Fuse box (behind the coin tray)
1. Turn the ignition switch to the “LOCK” position and turn off all elec-
trical accessories.
HS0202
2. Open the coin tray and pull it horizontally to remove it.
3. Determine which fuse may be blown. The back side of the coin
tray and the “Fuse and circuits” section in chapter 11 in this manual
show the circuit for each fuse.
HS0208HS0207
Fuse puller
Fuse puller
Spare fuses
4. Pull out the fuse with the fuse puller. The fuse puller is stored in the
main fuse box cover in the engine compartment.
To Next Page
Loading...
