Subaru 2002 Legacy - Heating

Legacy U.S.A..(ENG.)A2290BE–A
4-8
To direct warm air toward the floor and the windshield:
1. Set the air flow control dial to the “
” position.
2. Set the temperature control dial to the most comfortable level.
3. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the “
” position.
B Heating
HB5013AA
To direct warm air toward the floor:
1. Set the air inlet selection button to the “OFF” position
2 Set the air flow control dial to the “
” position.
3. Set the temperature control dial to the most comfortable level.
4. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air outlets. To
stop warm air flow from these outlets, turn the corresponding
thumb-wheel to the “
” position.