Legacy U.S.A..(ENG.)A2290BE–A
11
Maintenance and service
11-29
– CONTINUED –
SAE viscosity No. and Applicable Temperature
OM-H0205
Power steering fluid
B Checking the fluid level
WARNING
Be careful not to burn yourself because the fluid may be hot.
CAUTION
D When power steering fluid is being added, use only clean fluid,
and be careful not to allow any dirt into the tank. And never use
different brands together.
D Avoid spilling fluid when adding it in the tank.
The power steering fluid expands greatly as its temperature rises; the
fluid level differs according to fluid temperature. Therefore, the reser-
voir tank has two different checking ranges for hot and cold fluids.
Check the power steering fluid level monthly.
1. Park the vehicle on a level surface, and stop the engine.
2. Check the fluid level of the reservoir tank.
When the fluid is hot after the vehicle has been run: Check that the oil
level is between “HOT MIN” and “HOT MAX” on the surface of the
reservoir tank.
To Next Page
Loading...
