EasyManua.ls Logo

Subaru 2002 Legacy - Selector Lever for Automatic Transmission

Subaru 2002 Legacy
476 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Legacy U.S.A..(ENG.)A2290BEA
7
Starting and operating
7-15
CONTINUED
NOTE
Immediately after a disconnected battery is reconnected or ATF (au-
tomatic transmission fluid) is replaced, you may feel that the auto-
matic transmission operation is somewhat unusual.
This results from erasure or invalidation of data the on-board com-
puter has collected and stored in memory to allow the transmission
to shift at the most appropriate times for the current condition of
your vehicle. Optimized shifting will be restored as the vehicle con-
tinues to be driven for a while.
J Selector lever for automatic transmission
HB7021BBHB7010AA
The selector lever has seven positions.
B P (Park)
This position is for parking the vehicle and starting the engine.
In this position, the transmission is mechanically locked to prevent the
vehicle from rolling freely.
When you park the vehicle, first set the parking brake fully, then shift
into the P position. Do not hold the vehicle with only the transmis-
sion.
A shift interlock function is employed in the automatic transmission
system to ensure safe starting of the vehicle.

Table of Contents