Subaru 2002 Legacy - Lumbar Support (if equipped)

Legacy U.S.A..(ENG.)A2290BE–A
1-8
HBS011AA
1. Slide the front seat forward as far as possible.
2. Pull off the head restraint while pressing the release button.
3. Recline the seatback rearward up to the lowest position. Remem-
ber to reinstall the head restraint whenever the seatback is raised
back.
B Lumbar support (if equipped)
HB1059BA
Pull the lever forward or backward.
Pulling the lever forward will increase the amount of support for your
lower back.