-
13
-
5-3 DISASSEMBLY PROCEDURE
Step Parts to remove Remarks and procedures Fasteners
1
Drain the engine oill Remove a drain plug (M8 x 12mm) located on both
sides of the case
Take care not to lose the gaskets
*
To discharge oil quickly, remove the oil gauge(M22)
12 mm spanner
2
Air cleaner Remove breather pipe from rocker cover 10mm box spanner
M6 nut:2pcs
GASKET
(Aluminum )
GASKET
(Rubber )
OIL GAUGE
URETHANE FOAM
M6 SELF LOCK NUT : 2pcs.
CLEANER BASE CLEANER COVER
GASKET(INTAKE)
BREATHER PIPE
ELEMENT
M8 DRAIN PLUG : 1pc.
STEP 1
STEP 2
To Next Page
Loading...
