Black plate (324,1)
一般Model "A2440GE-A" EDITED: 2007/ 6/ 15
7-56 Starting and operating
“ON” position and goes out after approxi-
mately 3 seconds.
The light comes on when the “CRUISE”
main switch is pressed.
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch “ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK (off)” position, and
then turn it again to the “ON” position.
. If this indicator light and the “
”
indicator light flash simultaneously
during driving, we re commend tha t
you have the vehicle checked by your
nearest SUBARU dealer.
& Cruise control set indicator
light
Type A
Type B
The cruise control set i ndicator ligh t
comes on when the ignition switch is
turned to the “ON” position and goes out
after approximately 3 seconds.
The light comes on when vehicle speed
has been set.
To Next Page
Loading...
Need help?
General
