Subaru Outback 2020 - Retrieving a Driver Profile; To Edit a Driver Profile

To edit a driver profile:
1 From the Home screen, select the Driver
Profile button.
2 Select “Edit” then select the profile you
need to edit. This will take you through the
same steps as when the profile was set
up.
Retrieving a Driver Profile
There are two ways to retrieve a driver profile. The system may automatically retrieve the
profile once you are in your Subaru with the radio on with your phone’s Bluetooth
®
active.
You can also manually retrieve or change the profile by following these steps:
1. Press the “Driver Profile” button.
2. Select the profile you want.
3. You will receive a pop up screen asking “
Are you sure you want to activate this
profile?”, select “OK”.
CREATING A DRIVER PROFILE
65