北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
Steps Operation Time Status
1 Sit in the driver’s seat, and close the door. — Close
2 Push “
” on the power door locking switch. — Close
3 Open the driver’s door. Within 5 sec. Close?Open
4
Push “
” on the power door locking switch
twice.
Within 5 sec. Open
5 Close and open the driver’s door twice. Within 10 sec.
Open?Close?
Open?Close?Open
6
Push “
” on the power door locking switch
twice while the door is open.
Within 10 sec. Open
7 Close and open the driver’s door once. Within 10 sec. Open?Close?Open
8 Close the door. Within 5 sec.
Open?Close
A chirp will sound and the functions will be disabled.
NOTE
In steps 4 and 6, press the power door locking switch firmly. If the switch is not
pressed firmly, the functions may not be disabled.
! Enabling functions
s02ap0702
When the procedure to disable the func-
tions is performed again, a chirp sound will
be heard, and the functions are enabled.
NOTE
. The keyless access function will be
enabled only if you perform the proce-
dure in the same manner you disabled
the function (for example, when dis-
abling by operating the driver’s door,
the function will not be enabled even if
you operate the access key fob).
. Press the push-button ignition
switch if you do not know the proce-
dure in which the keyless access func-
tion was disabled.
– When disabling by operating the
driver’s door: A chirp will not be
heard.
– When disabling by operating the
access key fob: A chirp will be
heard.
– CONTINUED –
Keyless Access with Push-Button Start System
129
2
Keys and Doors
To Next Page
Loading...
