北米Model "A2600BE-B" EDITED: 2020/ 10/ 1
! Other markings
s13ab0103
The following makings are also
placed on the sidewall.
! Maximum permissible infla-
tion pressure
s13ab010301
The maximum cold inflation pres-
sure to which this tire may be
inflated. For example, “350 kPa
(51 PSI) MAX. PRESS”
! Maximum load rating
s13ab010302
The load rating at the maximum
permissible weight load for this tire.
For example, “MAX. LOAD 615 kg
(1,356 LBS) @ 350 kPa (51 PSI)
MAX. PRESS.”
WARNING
Maximum load rating applies
only to the tire, not to the
vehicle. Putting a load rated
tire on any vehicle does not
mean the vehicle can be
loaded up to the tire’s rated
load.
! Construction type
s13ab010303
Applicable construction of this tire.
For example, “TUBELESS STEEL
BELTED RADIAL”
! Construction
s13ab010304
The generic name of each cord
material used in the plies (both
sidewall and tread area) of this tire.
For example, “PLIES: TREAD 2
STEEL + 2 POLYESTER + 1
NYLON SIDEWALL 2 POLYE-
STER”
! Uniform Tire Quality Grad-
ing (UTQG)
s13ab010305
For details, refer to “Uniform Tire
Quality Grading Standards” FP562.
& Recommended Tire Inflation
Pressure
s13ab02
! Recommended cold tire in-
flation pressure
s13ab0201
For the recommended cold tire
inflation pressure for your vehicle’s
tires, refer to “
Tires” FP536.
! Vehicle placard
s13ab0202
The vehicle placard is affixed to the
driver’s side B-pillar.
Example:
Tire Information
552
To Next Page
Loading...
